Furnace Repair Services in Federal Heights, CO

Yes. The flame sensor sits directly in the burner flame and generates a micro-amp electrical current when heated to prove to the control board that fire is present. Over time, silica and carbon coat the metal rod, preventing flame detection and causing the furnace to shut off its gas valve after 3 to 5 seconds. Cleaning or replacing this sensor is a routine, fast repair for our Federal Heights, Colorado specialists.

The draft inducer is a small motorized fan that turns on before the burners ignite. Its purpose is to pull combustion air through the heat exchanger and expel toxic exhaust gases safely out the flue vent. A pressure switch verifies that this draft is established; if the inducer motor fails or the vent is blocked, the furnace will lock out as a safety precaution.

A loud bang upon ignition indicates delayed ignition. When burner orifices become partially obstructed with dust, rust, or spiderwebs, gas collects inside the combustion chamber before reaching the ignition source, creating a mini-explosion when it finally catches. This can warp or crack heat exchangers over time. Contact (877) 719-1221 immediately in Federal Heights, Colorado to have the burners professionally serviced.

High-pitched screeching or metallic grinding usually signals failing sleeve or ball bearings inside the blower motor, or a misaligned blower wheel scraping against the housing. Operating a furnace with damaged bearings can overheat the motor and burn out internal electrical windings. Our Federal Heights, Colorado technicians can lubricate, re-align, or replace the blower motor assembly promptly.

Yes, Local Furnace Repair Pro backs every heating repair with a comprehensive warranty on all installed replacement parts and labor. If the repaired component experiences any performance issues during the warranty period, we will send a technician back to your Federal Heights, Colorado home to rectify the issue without delay.

During warm summer months, ambient dust settles onto the furnace burners and heat exchanger surfaces. During the first cold snap, this thin layer of dust burns off, producing a mild, transient burning odor that typically disappears within 30 to 45 minutes. If the smell persists, smells of burning plastic/wiring, or produces visible smoke, shut down the system and call (877) 719-1221 immediately.