Furnace Repair Services in Lebanon, WI

The draft inducer is a small motorized fan that turns on before the burners ignite. Its purpose is to pull combustion air through the heat exchanger and expel toxic exhaust gases safely out the flue vent. A pressure switch verifies that this draft is established; if the inducer motor fails or the vent is blocked, the furnace will lock out as a safety precaution.

As an industry rule of thumb, if your furnace is under 12 years old and the estimated repair expense is less than 50% of the cost of a replacement system, professional repair is generally the most economical choice. However, if your unit has a compromised heat exchanger or requires chronic seasonal fixes, our Lebanon, Wisconsin team will provide an unbiased, pressure-free evaluation of your options.

Natural gas utilities add mercaptan (a distinctive rotten-egg smell) to help you detect leaks. If you smell gas, evacuate everyone from the house immediately without operating wall switches, phones, or electrical devices that could create an electrical spark. From outside your home in Lebanon, Wisconsin, contact your local gas utility and call (877) 719-1221 for emergency gas valve and line inspection.

First, verify that your thermostat is set to "Heat" mode with the setpoint at least 5 degrees above current room temperature. Check that the emergency power switch mounted on or near your furnace is in the "On" position, and inspect your home electrical panel for a tripped heating breaker. If the blower runs but only delivers chilly air, or if you hear repetitive clicking without ignition, call (877) 719-1221 immediately for fast heating assistance in Lebanon, Wisconsin.

HVAC manufacturers and safety organizations recommend scheduling professional maintenance once per year, ideally in early autumn prior to continuous winter operation. Annual tune-ups clean combustion residues, verify gas pressure, inspect electrical connections, and verify safety controls, which prevents mid-winter breakdowns and lowers monthly utility bills in Lebanon, Wisconsin.

High-pitched screeching or metallic grinding usually signals failing sleeve or ball bearings inside the blower motor, or a misaligned blower wheel scraping against the housing. Operating a furnace with damaged bearings can overheat the motor and burn out internal electrical windings. Our Lebanon, Wisconsin technicians can lubricate, re-align, or replace the blower motor assembly promptly.