Furnace Repair Services in Hastings, PA

Yes. The flame sensor sits directly in the burner flame and generates a micro-amp electrical current when heated to prove to the control board that fire is present. Over time, silica and carbon coat the metal rod, preventing flame detection and causing the furnace to shut off its gas valve after 3 to 5 seconds. Cleaning or replacing this sensor is a routine, fast repair for our Hastings, Pennsylvania specialists.

Our factory-trained technicians carry diagnostic tools and OEM-certified parts for all major brands, including Carrier, Trane, Lennox, Rheem, Goodman, York, Bryant, Heil, Ruud, Amana, and Day & Night. Whether your unit is a high-efficiency 96% AFUE condensing model or a standard 80% atmospheric system, we have you covered in Hastings, Pennsylvania.

During warm summer months, ambient dust settles onto the furnace burners and heat exchanger surfaces. During the first cold snap, this thin layer of dust burns off, producing a mild, transient burning odor that typically disappears within 30 to 45 minutes. If the smell persists, smells of burning plastic/wiring, or produces visible smoke, shut down the system and call (877) 719-1221 immediately.

Electric furnaces do not use combustible fuel or heat exchangers; instead, they pass high-voltage electric current through heavy-duty nichrome heating elements. Common electric furnace repairs involve replacing broken heating coils, stuck electric sequencers, faulty contactors, or blown thermal fuses. Our technicians in Hastings, Pennsylvania service both electric and gas heating configurations.

A fractured heat exchanger is a critical safety issue that can contaminate household air with carbon monoxide. Key warning signs include persistent soot streaks around the burner doors, a pungent chemical smell resembling formaldehyde, burner flames that flicker or burn yellow rather than steady blue, and unexplained headaches among household members. We use fiber-optic inspection cameras in Hastings, Pennsylvania to check internal heat exchanger integrity.

The draft inducer is a small motorized fan that turns on before the burners ignite. Its purpose is to pull combustion air through the heat exchanger and expel toxic exhaust gases safely out the flue vent. A pressure switch verifies that this draft is established; if the inducer motor fails or the vent is blocked, the furnace will lock out as a safety precaution.