Furnace Repair Services in Montrose, NY

Yes. The flame sensor sits directly in the burner flame and generates a micro-amp electrical current when heated to prove to the control board that fire is present. Over time, silica and carbon coat the metal rod, preventing flame detection and causing the furnace to shut off its gas valve after 3 to 5 seconds. Cleaning or replacing this sensor is a routine, fast repair for our Montrose, New York specialists.

Cold air discharge usually points to an extinguished pilot flame, an oxidized flame sensor rod that shuts down the gas valve after a few seconds, an overheated heat exchanger tripping the high-limit switch, or an ignition lock-out. Our certified technicians in Montrose, New York utilize digital multimeters and combustion testers to pinpoint the exact failure point and restore comfortable heat.

As an industry rule of thumb, if your furnace is under 12 years old and the estimated repair expense is less than 50% of the cost of a replacement system, professional repair is generally the most economical choice. However, if your unit has a compromised heat exchanger or requires chronic seasonal fixes, our Montrose, New York team will provide an unbiased, pressure-free evaluation of your options.

HVAC manufacturers and safety organizations recommend scheduling professional maintenance once per year, ideally in early autumn prior to continuous winter operation. Annual tune-ups clean combustion residues, verify gas pressure, inspect electrical connections, and verify safety controls, which prevents mid-winter breakdowns and lowers monthly utility bills in Montrose, New York.

During warm summer months, ambient dust settles onto the furnace burners and heat exchanger surfaces. During the first cold snap, this thin layer of dust burns off, producing a mild, transient burning odor that typically disappears within 30 to 45 minutes. If the smell persists, smells of burning plastic/wiring, or produces visible smoke, shut down the system and call (877) 719-1221 immediately.

First, verify that your thermostat is set to "Heat" mode with the setpoint at least 5 degrees above current room temperature. Check that the emergency power switch mounted on or near your furnace is in the "On" position, and inspect your home electrical panel for a tripped heating breaker. If the blower runs but only delivers chilly air, or if you hear repetitive clicking without ignition, call (877) 719-1221 immediately for fast heating assistance in Montrose, New York.