Furnace Repair Services in Reno, NV

Total repair cost depends on the specific component requiring service—such as an igniter replacement, blower motor capacitor, gas valve solenoid, or electronic control board. Local Furnace Repair Pro eliminates pricing guesswork with written flat-rate estimates following an on-site diagnosis. You receive the exact price upfront before any work starts, with no unexpected labor add-ons.

As an industry rule of thumb, if your furnace is under 12 years old and the estimated repair expense is less than 50% of the cost of a replacement system, professional repair is generally the most economical choice. However, if your unit has a compromised heat exchanger or requires chronic seasonal fixes, our Reno, Nevada team will provide an unbiased, pressure-free evaluation of your options.

During warm summer months, ambient dust settles onto the furnace burners and heat exchanger surfaces. During the first cold snap, this thin layer of dust burns off, producing a mild, transient burning odor that typically disappears within 30 to 45 minutes. If the smell persists, smells of burning plastic/wiring, or produces visible smoke, shut down the system and call (877) 719-1221 immediately.

High-pitched screeching or metallic grinding usually signals failing sleeve or ball bearings inside the blower motor, or a misaligned blower wheel scraping against the housing. Operating a furnace with damaged bearings can overheat the motor and burn out internal electrical windings. Our Reno, Nevada technicians can lubricate, re-align, or replace the blower motor assembly promptly.

Yes. The flame sensor sits directly in the burner flame and generates a micro-amp electrical current when heated to prove to the control board that fire is present. Over time, silica and carbon coat the metal rod, preventing flame detection and causing the furnace to shut off its gas valve after 3 to 5 seconds. Cleaning or replacing this sensor is a routine, fast repair for our Reno, Nevada specialists.

The draft inducer is a small motorized fan that turns on before the burners ignite. Its purpose is to pull combustion air through the heat exchanger and expel toxic exhaust gases safely out the flue vent. A pressure switch verifies that this draft is established; if the inducer motor fails or the vent is blocked, the furnace will lock out as a safety precaution.